• 3G OBD GPS Tracker
  • 3G OBD GPS Tracker
  • 3G OBD GPS Tracker
  • 3G OBD GPS Tracker

3G OBD GPS Tracker

Model NO. IDD-213W

IDD-213W is an intelligent on-board diagnostic device with OBD II and SAE J1939/J1708 (Heavy duty) compliant, it features plug-and-play technology, could read diagnostic info from vehicle ECU and capture location data with built-in GPS, then send them to backend server for real-time remote diagnostic and tracking purpose.


Protocol Supported
SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4, ISO 15765-4, SAE J1939 (Heavy duty), SAE J1587/J1708 (Heavy duty)

Plug-and-Plug

Easily install.

Unicode:

Realtime Tracking

Can report the real-time location according the time interval ,distance,heading change.

Driving Behavior

Including speeding, hard acceleration, hard deceleration etc.

Remote Power off

Remote power off the engine via connect a relay.

 

Fuel Consumption

Statistics the trip fuel consumption.

Engine Data

Read engine data and diagnostic trouble codes.

Mileage

Statistics the trip mileage.

Unplug Alarm

When the device is removed, it will send out an alarm to server.


 
Mechanical
Size 63mm (L) x 48mm (W) x 28mm (H)
Weight 50g
 
 
 
Interface
OBD interface: 16 pin standard OBD II
Configuration interface: Mini-USB SOS button interface: MMCX
SIM card interface: Push-Push Type
Data transmission Packet data (GPRS or HSPA) and SMS
Positioning method GPS
Storage 2MB FLASH, up to 24,000 GPS data storage
 
 
 
 
 
OBD protocol
SAE J1850 PWM
SAE J1850 VPW ISO 9141-2
ISO 14230-4
ISO 15765-4
SAE J1939
SAE J1587/J1708
 
 
 
 
 
Power
Working
Voltage
 
9-36VDC
 
Working
Current
Max.: <200mA@13.8/27.6VDC
Average: <150mA@13.8/27.6VDC Sleep mode: <10mA@12/24VDC
Backup battery 3.7V/160mAH
 
 
 
 
 
 
 
 
 
 
 
 
Cellular
Frequency:
GSM/GPRS: 850/900/1800/1900MHz
UMTS/HSPA: 800/850/900/1900/2100MHz Network protocol: Embedded TCP/IP stack Sensitivity:
-110dBm@UMTS
-109dBm@850/900MHz
-108dBm@1800/1900MHz
Output power:
Class 4 (2W, 33dBm)@850/900MHz Class 1 (1W, 30dBm)@1800/1900MHz Class 3 (0.25W, 24dBm)@UMTS
Certification:
CE, GCF, FCC, PTCRB, IC, AT&T
6-axis IMU Driving behavior detection
LED Indication GPS/Cellular/OBD indication
Buzzer System status/Alarm indication
 
Antenna
Cellular Internal
GPS Internal
 
 
 
 
 
Accessories
Configuration cable
OBD II extension cable
9-Pin deutsch wiring harness
6-Pin deutsch wiring harness
T-Cable for relay
Power cable
SOS button
 
 
 
 
Environment
Working
Temperature
 
-30℃ ~ +70℃
Storage
Temperature
 
-40℃ ~ +85℃
Humidity 5%~95%(no fog)

Yes, Once the device is fully active you can switch it between vehicles as you desire.
Yes the OBD unit can be installed in less then 30 seconds.
The devices use the cellular networks to transmit data back to our servers. All the location are obtained using a minimum of 4 satellites . This unit is currently only offered on the AT&T network.
By default the devices do not make any noise. All devices have dim LEDs. You can cover them if needed and it will not impact service.
Every passenger vehicle manufactured since 1996 has an OBD port. Heavy duty trucks manufactured after 2000 are compatible and will have one of two ports. 6 pin J1708 or 9 pin J1962. You will need an adapter or the HD Y cable.
4G OBD GPS Tracker

16pin Flat Extension Cable

 

Learn More
4G OBD GPS Tracker

9(6)-Pin deutsch wiring harness


Learn More
4G OBD GPS Tracker

ACC Power Converter 

 

Learn More

4G OBD GPS Tracker

Engine cut off relay 

 

Learn More

Copyright © 2018 深圳诺仁技术有限公司
粤ICP备17109363号-2