• 2G OBD GPS Tracker
  • 2G OBD GPS Tracker
  • 2G OBD GPS Tracker
  • 2G OBD GPS Tracker
  • 2G OBD GPS Tracker

2G OBD GPS Tracker

Model NO. IDD-213GD

IDD-213GD is an intelligent on-board diagnostic device compatible with passenger and commercial vehicles, it features plug-and-play technology, could read diagnostic info from vehicle ECU and capture location data, then send them to backend server for real-time remote diagnostic and tracking purpose.

Plug-and-Plug

Easily install.

Unicode:

Realtime Tracking

Can report the real-time location according the time interval ,distance,heading change.

Driving Behavior

Including speeding, hard acceleration, hard deceleration etc.

Remote Power off

Remote power off the engine via connect a relay.

 

Fuel Consumption

Statistics the trip fuel consumption.

Engine Data

Read engine data and diagnostic trouble codes.

Mileage

Statistics the trip mileage.

Unplug Alarm

When the device is removed, it will send out an alarm to server.


Mechanical Size 63mm (L) x 48mm (W) x 28mm (H)
Weight 50g
Interface OBD interface: 16 pin standard OBD II
Configuration interface: Micro-USB
SIM card interface: Push-Push Type
Data transmission GPRS/SMS
Positioning method GPS
Storage 2MB FLASH, up to 24,000 GPS data storage
OBD protocol SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO 14230-4
ISO 15765-4
SAE J1939
SAE J1587/J1708
Power Working Voltage 9-36VDC
Working Current Max.: <200mA@13.8/27.6VDC
Average: <150mA@13.8/27.6VDC
Sleep mode: <10mA@12/24VDC
Backup battery 3.7V/160mAH
GPS Channels: 66
Sensitivity: -165dBm
Accuracy: 5m CEP
Time to first fix:
Cold start: <35s (typ.)
Hot start: <1s (typ.)
Cellular Frequency:
GSM/GPRS: 850/900/1800/1900MHz
Network protocol: Embedded TCP/IP stack
Sensitivity:
-107dBm@850/900MHz
-106dBm@1800/1900MHz
Output power:
Class 4 (2W, 33dBm)@850/900MHz
Class 1 (1W, 30dBm)@1800/1900MHz
Driving behavior detection 6-axis IMU 
LED Indication GPS/Cellular/OBD indication
Antenna Cellular Internal
GPS Internal
Accessories Configuration cable
OBD II extension cable
9-Pin deutsch wiring harness
6-Pin deutsch wiring harness
Power cable
Environment Working Temperature -30℃ ~ +70℃
Storage Temperature -40℃ ~ +85℃
Humidity 5%~95%(no fog)

Yes, Once the device is fully active you can switch it between vehicles as you desire.
Yes the OBD unit can be installed in less then 30 seconds.
The devices use the cellular networks to transmit data back to our servers. All the location are obtained using a minimum of 4 satellites . This unit is currently only offered on the AT&T network.
By default the devices do not make any noise. All devices have dim LEDs. You can cover them if needed and it will not impact service.
Every passenger vehicle manufactured since 1996 has an OBD port. Heavy duty trucks manufactured after 2000 are compatible and will have one of two ports. 6 pin J1708 or 9 pin J1962. You will need an adapter or the HD Y cable.
4G OBD GPS Tracker

16pin Flat Extension Cable

 

Learn More
4G OBD GPS Tracker

9(6)-Pin deutsch wiring harness


Learn More
4G OBD GPS Tracker

ACC Power Converter 

 

Learn More

4G OBD GPS Tracker

Engine cut off relay 

 

Learn More

Copyright © 2018 深圳诺仁技术有限公司
粤ICP备17109363号-2