• Cat.M1 OBD GPS Tracker
  • Cat.M1 OBD GPS Tracker
  • Cat.M1 OBD GPS Tracker

Cat.M1 OBD GPS Tracker

Model NO. IDD-213M

IDD-213M is an intelligent on-board diagnostic device compatible with passenger and commercial vehicles, it integrates the latest CAT M1 technology to transform LTE for IoV market. It features plug-and-play technology, could read diagnostic info from vehicle ECU and capture location data, then send them to backend server for real-time remote diagnostic and tracking purpose. 


Easily install.


Realtime Tracking

Can report the real-time location according the time interval ,distance,heading change.

Driving Behavior

Including speeding, hard acceleration, hard deceleration etc.

Remote Power off

Remote power off the engine via connect a relay.


Fuel Consumption

Statistics the trip fuel consumption.

Engine Data

Read engine data and diagnostic trouble codes.


Statistics the trip mileage.

Unplug Alarm

When the device is removed, it will send out an alarm to server.

Mechanical Size 63mm (L) x 48mm (W) x 28mm (H)
Weight 50g
Interface OBD interface: 16 pin standard OBD II
Configuration interface: Micro-USB
SIM card interface: Micro SIM, Push-Push Type
Data transmission Packet data (LTE) and SMS
Positioning method GPS
Storage 2MB FLASH, up to 24,000 GPS data storage
OBD protocol SAE J1850 PWM
ISO 9141-2
ISO 14230-4
ISO 15765-4
SAE J1939
SAE J1587/J1708
Power Working Voltage 9-36VDC
Working Current Max.: <200mA@13.8/27.6VDC
Average: <150mA@13.8/27.6VDC
Sleep mode: <10mA@12/24VDC
Backup battery 3.7V/160mAH
GPS Channels: 66
Sensitivity: -165dBm
Accuracy: 5m CEP
Time to first fix:
Cold start: <30s (typ.)
Hot start: <1s (typ.)
Cellular Frequency:
FDD LTE B4/B13 (Verizon)
FDD LTE B2/B4/B12 (AT&T)
  CAT M1: DL/UL Max. 300/375kbps
Network protocol: Embedded TCP/IP stack 
GCF, FCC, PTCRB, IC, Verizon, AT&T
6-axis IMU Driving behavior detection
LED Indication GPS/Cellular/OBD indication
Buzzer System status/Alarm indication
Antenna Cellular Internal
GPS Internal
Accessories Configuration cable
OBD II extension cable
9-Pin deutsch wiring harness
6-Pin deutsch wiring harness
Power cable
Environment Working Temperature -30℃ ~ +70℃
Storage Temperature -40℃ ~ +85℃
Humidity 5%~95%(no fog)

Yes, Once the device is fully active you can switch it between vehicles as you desire.
Yes the OBD unit can be installed in less then 30 seconds.
The devices use the cellular networks to transmit data back to our servers. All the location are obtained using a minimum of 4 satellites . This unit is currently only offered on the AT&T network.
By default the devices do not make any noise. All devices have dim LEDs. You can cover them if needed and it will not impact service.
Every passenger vehicle manufactured since 1996 has an OBD port. Heavy duty trucks manufactured after 2000 are compatible and will have one of two ports. 6 pin J1708 or 9 pin J1962. You will need an adapter or the HD Y cable.
4G OBD GPS Tracker

16pin Flat Extension Cable


Learn More
4G OBD GPS Tracker

9(6)-Pin deutsch wiring harness

Learn More
4G OBD GPS Tracker

ACC Power Converter 


Learn More

4G OBD GPS Tracker

Engine cut off relay 


Learn More

Copyright © 2018 深圳诺仁技术有限公司