• Hardwired GPS Tracker
  • Hardwired GPS Tracker
  • Hardwired GPS Tracker
  • Hardwired GPS Tracker
  • Hardwired GPS Tracker

Hardwired GPS Tracker

Model NO. LT-162

LT-162 is a vehicle GPS Tracker with wide range voltage input, compact size, and built-in GPS/GSM antenna. It’s ideally suitable for motorcycle, electro mobile and common vehicles in the anti-theft and tracking market. 

SOS Alarm

When meet an emergency event ,press the SOS button to send the alarm to server.


Realtime Tracking

Can report the real-time location according the time interval ,distance,heading change.

Cornering Compensation

there will be an additional GPS report when device detects a certain angular deviation (default as 30 degrees) at a turning point.

Remote Power off

Remote power off the engine via connect a relay.


Over-speed Alarm

When reach the setting speed in device ,will send out an alarm to server.


Statistics the trip mileage.

Unplug Alarm

When the device is removed, it will send out an alarm to serve.

Mechanical Parameters Dimension 70mm(L) x 50mm(W) x 22mm(H)
Weight 50g
Data transmission GPRS/SMS
Positioning method GPS/BeiDou/LBS
Built-In battery NI-MH AAA 3.6V/300mA, working for 2 hours
Power Average Current: <30mA (DC 12V)
Maximum current: <10mA (DC 12V)
GPS/BeiDou Channels: 50
Sensitivity: -147dBm
Accuracy: 5m CEP
Cold start: <27s
Hot start: <1s
GSM Working Frequency: 850/900/1800/1900MHz
Network protocol: Embedded TCP/IP stack
Sensitivity:    -107dBm@850/900MHz
Output power:  Class 4 (2W)@850/900MHz
Class 1 (1W)@1800/1900MHz
GPRS data: GPRS Class 10, Mobile Station Class B
LED Indication GPS/GPRS
Environmental Parameter Working Temperature -20℃ ~ +70℃
Humidity 5% ~ 95% (no fog)
Yes, Once the device is fully active you can switch it between vehicles as you desire.
Yes the OBD unit can be installed in less then 30 seconds.
The devices use the cellular networks to transmit data back to our servers. All the location are obtained using a minimum of 4 satellites . This unit is currently only offered on the AT&T network.
By default the devices do not make any noise. All devices have dim LEDs. You can cover them if needed and it will not impact service.
Every passenger vehicle manufactured since 1996 has an OBD port. Heavy duty trucks manufactured after 2000 are compatible and will have one of two ports. 6 pin J1708 or 9 pin J1962. You will need an adapter or the HD Y cable.
4G OBD GPS Tracker

Engine cut off relay 

By eliminating the traditional round cable and replacing it with a flat flexible ribbon and low profile J1962 OBD II port connectors we have created a cable with the largest amount of flexibility ever! The cable can be bent to the left or right, under, over, or around just about anything.

Learn More

Copyright © 2018 深圳诺仁技术有限公司